effective shear
英 [ɪˈfektɪv ʃɪə(r)]
美 [ɪˈfektɪv ʃɪr]
有效剪力
双语例句
- The result shows that the WTZN clay-free drilling fluid viscosifier is quite effective and improves dynamic shear force and cutting carrying ability.
结果表明：WTZN无固相钻井液增粘剂增粘、提高动切力效果好，有利于提高钻井液携带岩屑能力； - Compressive stress produced by horizontal prestressing tendons within the raft foundation has much to do with the effective prestress and punching shear capacity.
在考虑应力扩散的影响对抗剪有效作用下，提出了预应力筏板基础边柱合理的抗冲切承载力计算公式。 - In China, the steel production have been in the high speed development, For larger yield and higher plate rate, an effective shear line become very necessary.
在钢铁行业高速发展、宽厚板车间不断升级过程中，剪切线也逐渐为人们所重视。 - The same parameters of effective shear strength were obtained form the axial compression and the lateral extension tests.
轴向加荷和侧向卸荷条件下得到的有效抗剪强度指标基本一致。 - It indicated that the laminated bamboo structure laminate could ensure the effective transmission of shear and showed reliable load resistance integrality.
具有较好的整体受力特征，能够保证剪力的可靠传递。 - Effective stress and shear strength of unsaturated soil with low water content
低含水率非饱和土的有效应力及抗剪强度 - The stress path has obvious influence on the total stress shear strength indexes, but almost no influence on the effective shear strength indexes.
应力路径对总应力强度指标有较大的影响，但对有效强度指标基本没影响。 - Triaxial shear tests were also conducted on the two liner specimens to obtain the total and effective shear strength.
再对斑脱土衬里进行三轴固结不排水实验，测定其总剪切强度与有效剪切强度。 - Upper and lower bounds of effective bulk and shear moduli for elastic composite materials with general ellipsoid of revolution inclusion have been calculated by using the approximate formulae, which related to the effective moduli of composite materials with imperfect interface under finite deformation, in reference.
应用文献〔13〕中有限变形下非完美界面弹性复合材料有效模量的近似公式和微分几何方法，计算了含一般旋转椭球体夹杂弹性复合材料有效体积模量和有效剪切模量的上下限界。 - The steady state of deformation for any mass of particles is that state in which the mass is continuously deforming at constant volume, constant normal effective stress, constant shear stress, and constant velocity.
稳态变形是指任何颗粒物体在常体积、常法向有效应力、常剪切应力、常速度时的一种连续变形状态。 - On the effective shear stress of sediment transport
剪应力对压杆的影响确定泥沙运动有效切应力方法的探讨 - In the same time, in team of the calculation of the effective section and shear buckling stress, the paper proposes the construction design method and formula fitting the Al-Mg-Mn alloy building sheets.
指出了铝镁锰合金建筑板材有效截面计算及剪切屈曲应力计算与钢材有显著差异，在此基础上提出了适合铝镁锰合金建筑板材的结构设计方法和计算公式。 - Equal cross section lateral extrusion ( ECSLE) is a effective method realizing pure shear deformation.
等截面侧向挤压是实现材料纯剪切变形的有效方法。 - A method is advanced to approximately determine the effective shear stiffness of frame structures.
提出了框架结构等效剪切刚度的近似计算公式，并与等效剪切刚度的理论值加以对比。 - The model makes it possible to calculate the macroscopic behaviors of the two-fluid flow, such as effective pressure, effective viscosity and shear viscosity of particle phase.
该模型能计算颗粒相压力、粘性系数、扩散系数、导热系数、颗粒温度等流体力学特性参数。 - Further a group of algebraic equations to predict effective longitudinal shear modulus of multiphase fiber composites were obtained by virtue of the averaged stress strain theorem.
根据复合材料平均应力与应变关系，获得了预测有效轴向模量的形式简单的代数方程。 - The results showed that drop deformation and breakup were sensitive to both shear and extensional flow fields. Extensional flow was more effective than shear flow in generating well-developed laminar PA6 phase.
结果表明：分散相PA6液滴的形成和破裂对剪切与拉伸流场的作用非常敏感，在拉伸流场作用下，更容易形成层状PA6分散相。 - The variation of the critical event is considered to be related to the difference of effective shear stress ahead of a notch root or a crack tip.
临界事件的变化认为与缺口根部和裂纹前端不同的有效剪应力有关。 - The method will be effective to predict the cyclic shear strength and stability of clay layers.
该方法为循环荷载作用下粘土地基的强度和稳定性预测提供有效的途径。 - A model for predicting the effective longitudinal shear modulus of unidirectional fiber reinforced composite materials
一个计算单向纤维增强复合材料纵向剪切模量的模型 - The effect of different effective pressures on compressional and shear wave velocities were analyzed.
在不同有效压力情况下测试了岩石的超声波纵横波速度，分析了有效压力对岩石速度的影响。 - The effective shear stress not only generalizes the flow intensity but also summarizes the flow intensities of mean flow velocity, stream power and unit stream power.
这一有效切应力不但是对切应力类水流强度指标的总结，还可以概括平均流速和水流功率等水流强度指标。 - This method is very effective, base shear, floor deformation, acceleration of isolation structure is less than no isolation structure.
而且隔震结构的基底剪力、层间位移、各层加速度都远远小于不隔震结构的计算结果。 - Using the new aviation lubrication oil as an example, the effective elastic shear modulus were calculated in various operating conditions.
以HKD-1型航空润滑油为例，计算了多种工况条件下系统有效剪切弹性模量及润滑剂本身的剪切弹性模量。 - The seismic response of an arch dam with contraction joints is analyzed and the results show that the algorithm is effective and effect of shear key of the contraction joints on the open displacement between the contact surface can not be ignored.
采用这一算法进行了考虑拱坝横缝张合效应的地震响应分析，结果表明考虑切向滑移约束对接触中的张开度有明显影响。 - The theoretical formulas are worked out to predict the effective bulk moduli, shear moduli and Young's moduli of the composite reinforced by hollow coating spheres using the developed five phase spherical model.
利用推广的五相球模型得到了含涂层空心微球填充复合材料的有效体积模量、剪切模量和杨氏模量预测的理论公式。 - Effective Shear Strength Index Bebaviour of Direct Shear Test of Soil
土的直剪试验有效抗剪强度指标的特性 - The cutting force and effective shear strain imposed on chips are increased and effective strain rate is decreased with the decreasing rake angle and cutting velocity.
研究结果表明：刀具前角的减小和切削速度的降低，使切削力和切屑产生的等效应变相应增大，等效应变速率相应减小。 - The contents of the paper are as follows: 1. Based on the simplified honeycomb models, cellular element method is first used to predict effective bulk modulus and effective shear modulus of perfect honeycombs.
具体研究内容如下：1.首先采用简化的蜂窝理论模型，使用单胞法理论预测无缺陷多层级蜂窝的等效体模量和剪切模量。 - The conventional direct shear test has defects that the normal stress load unsteadily, it has friction between the shear box wall and the soil sample, shear rate unstably fluctuate, effective shear area is decreasing and so on.
且常规的直剪试验存在正应力加载不稳定、剪切盒侧壁与土体试样之间存在摩擦力的影响、剪切速率不恒定、有效剪切面积减小等缺陷。